Printed Touch Sensors Using Carbon NanoBud （印刷使用碳NanoBud触摸传感器）.pdfVIP

Printed Touch Sensors Using Carbon NanoBud® Material Anton S. Anisimov*, David P. Brown*, Bjørn F. Mikladal*, Liam Ó Súilleabháin*, Kunjal Parikh**, Erkki Soininen*, Martti Sonninen*, Dewei Tian*, Ilkka Varjos*, Risto Vuohelainen* * Canatu Oy, Helsinki, Finland, erkki.soininen@ ** Intel Corporation, Santa Clara, USA, kunjal.parikh@ Abstract fullerenes with the high conductivity and robustness of nanotubes. Carbon NanoBud® transparent conductive films and touch Aerosol synthesis of carbon nanotubes has been demonstrated by sensors were manufactured by aerosol synthesis, Direct Dry Nasibulin et al. [2]. This method has been modified and scaled to Printing® and laser ablation. Touch sensors with high contrast produce commercial quantities of clean, lightly bundled, high for outdoor readability, flexibility allowing folding, and sharp - crystallinity CNBs directly in the gas phase, thus eliminating the angle 3D-formability are described. CNB ™film production has need for liquid processing. now started for high-quality touch applications. Canatu has also developed a new thin film manufacturing method Author Keywords called Direct Dry Printing® (DDP) based on the work described in Kaskela et al. [3] and the thermophoretic technique described in touch sensor; projected capacitive touch; transparent conductive Gonzales