RESIDENTIAL COOLING AND HEATING LOAD （住宅冷却和热负荷）.pdfVIP

CHAPTER 17 RESIDENTIAL COOLING AND HEATING LOAD CALCULATIONS Residential Features 17.1 Common Data and Procedures 17.3 Calculation Approach 17.1 Cooling Load 17.8 Other Methods 17.2 Heating Load 17.11 Residential Heat Balance (RHB) Method 17.2 Load Calculation Example 17.12 Residential Load Factor (RLF) Method 17.2 Symbols 17.14 HIS chapter covers cooling and heating load calculation • Dehumidification Issues. Dehumidification occurs during cool- Tprocedures for residential buildings, including detailed heat- ing unit operation only, and space condition control is usually balance methods that serve as the basis for cooling load calculation. limited to use of room thermostats (sensible heat-actuated Simple cooling-load procedures, suitable for hand calculations, are devices). Excessive sensible capacity results in short-cycling and provided for typical cases. Straightforward heating load calculation severely degraded dehumidification performance. procedures are also included. In addition to these general features, residential buildings can be Procedures in this chapter are based on the same fundamentals as categorized according to their exposure: the nonresidential methods in Chapter 18. However, many charac- teristics distinguish residential loads, and Chapter 18’s procedures • Single-Family Detached. A house in this category usually has should be applied with care to residential applications.