- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
《铁机》Ce对耐热铝导体材料铸态组织和性能的
第 42 卷第 10 期 中南大学学报(自然科学版) Vol.42 No.10
2011 年 10 月 Journalof Central South University(Scienceand Technology) Oct.2011
Ce 对耐热铝导体材料铸态组织和性能的影响
李红英,孙远,宾杰,刘洋,曹俊
(中南大学 材料科学与工程学院,湖南 长沙,410083)
摘要:采用电阻率测试、硬度测试、金相显微镜和扫描电镜观察等方法,研究添加不同含量稀土 Ce 对铸态耐热
铝导体材料 Al0.15Zr合金的影响。研究结果表明:Ce能净化基体,与杂质相形成金属间化合物,改变杂质相的
形态和分布; 添加适量的 Ce, 显著细化了晶粒和枝晶组织,有利于导电性和强度的提高; 随着 Ce加入量的增大,
晶粒细化效果更好;当 Ce 含量(质量分数)超过 0.3%以后,二次枝晶间距继续减小,但晶粒尺寸细化不明显;当
Ce含量为 0.3%和 0.4%时,Al0.15Zr 合金的导电性和强度均达到最大值。
关键词:Ce;耐热铝导体;细化;电导率;铸态组织
中图分类号:TG146.2 文献标志码:A 文章编号:1672−7207(2011)10−3026−07
Effect of cerium on ascast microstructure and properties of
heatresistant aluminum conductor
LI Hongying, SUN Yuan, BIN Jie,LIUYang,CAOJun
(School of Materials Science and Engineering, Central South University, Changsha 410083, China)
Abstract: The microstructure and properties of ascast heatresistant Al0.15Zr conductor with different amounts of Ce
were studied by means of electrical resistivity measurement, hardness test, optical microscopy and scanning electrical
microscopy. The results show that metallic compound containing Ce and impurity are congregated at the grain boundary
and dendritic boundary, which is beneficial to the electrical conductivity and strength. Alloying of Ce refines the grain
and dendrite of Al0.15Zr alloy. The refine effect ismore significant with the increaseof Ce amount.Whenthe amount of
Ce is more than 0.3%, the dendrite arm spacing decreases, but the grain size is not changed obviously. The electrical
resistivityand strength of alloys reach themaximumvalues by adding 0.3% and 0.4%
文档评论(0)