薄层加铺无缝地坪施工介绍与说明Introduction and interpretation of.PDF

2009 TCI 2009 Conference on Concrete Eng ineering Paper No. Introduction and interpretation of Jointless Concrete Thin Topping 0.2mm C-S-H 1/3~1/4 5cm~10cm 14~28 #50~#300 ( ) C-S-H Abstract Cracks induced by drying shrinkage in thin concrete topping, always a nightmare to the contractors. Whatever in using wire mesh, shorten the distance of joints, curling and irregular cracks always problems along with floor construction. Author have been involving some of projects in this application, like topping of parking lot in basement, topping for protection of waterproofing membrane, topping on warehouse for flatness purpose, nearly all of them plagued by random cracks and curling in the joints. However, the idea is, inducing by pre-set crack inducer with mo re induced cracks creates the width of cra cks less than 0.2mm, which are nearly invisible, then using liquid penetrating densifier to react with free lime (Ca(OH) ) and formed Calcium Silica te Hydrate 2 (C-S-H) gel, heal and linked the fissure. The Jointless Floor is derived therefore. 1 2009 2009 11 6~7 The process of construction is, fixing steel strips with 1/3~1/4 high of slab thickness on the ground with certain interval, pours 5cm~10cm steel fiber concrete, then floats and compacts