Coupons of Corrosion in CuAlNi in the （优惠券提高在相变的腐蚀）.pdfVIP

Coupons of Corrosion in CuAlNi in the Petroleum Industry: A valuable additional resource in electrochemical techniques a b c d M. C. P. Cruz , R. T. Figueiredo , R. E. Souza , P. M. M. Araújo a Faculdade Pio Décimo, Av. Tancredo Neves, 5655 , Sergipe-Brasil b Instituto de Tecnologia e Pesquisa, Av. Murilo Dantas, 300, Sergipe-Brasil c Petrobras, Rua Acre, 2504, Sergipe-Brasil d Departamento de Engenharia mecânica, UFS, Sergipe-Brasil This study evaluates the corrosive behavior of the alloy CuAlNi with Shape Memory Effect when exposed to fluids produced in mature onshore oil fields (coupons) and in the laboratory (immersion and Tafel curves). The resistance of the alloy to corrosion was shown to be low when exposed to water produced in steady state with salinity levels similar to sea water in temperatures approximate to those found in the related environment, however when the corrosion coupon was used more severe corrosion was perceived. Keywords: coupon, corrosion levels, CuAlNi alloy Introduction In the oil and gas industries there are normally occurring synergies between physico-chemical variables, as well as variables of flow, pressure, and of erosion in the corrosion. To isolate the effects of each of these variables would most likely lead to a difficult interpretation of this study. A more viable strategy is the experimental simulation of the physico-chemical environmental conditions through a laboratory experimental design, especially to study the combined effects of these variables. Another way in which to reliably analyze corrosion in