Developing Procedures And Standards For （发展过程和标准）.pdfVIP

Developing Procedures And Standards For Mobile Air Conditioning Systems SAE Alternate Refrigerant Symposium June/July 2004 Ward Atkinson Industry Guidelines Standards • System Design Requirements – Refrigerant Lines and Hoses – Pressure Relief Devices [5 to 10 times higher] – Service Fittings – Controls For Refrigerant Safety Mitigation • Service Sector Requirements – Technician Training Certification – Refrigerant Removal Charging Equipment – Refrigerant Leak Detection Equipment – Service Tools SAE J639 Safety Standards for Motor Vehicle Refrigerant Vapor Compression Systems [UNDER REVISION] • Refrigerant vapor compression systems providing cooling and/or heating • Design standards for refrigerant containment and safety – Included are cautionary statements to alert service technicians to the inadvisability and the possible health and safety effects associated with venting refrigerant during service. • The document addresses only CFC-12, HFC-134a, HFC152a a flammable gas and carbon dioxide refrigerants. • To prevent system contamination all refrigerants used in mobile air conditioning vapor compression systems require unique service fittings. The unique service fittings minimize the potential for system refrigerant contamination during service activity. SAE J639 Pressure Relief Devices Overcharged System? SAE J639 Pressure Relief Devices Overcharge? Wrong Refrigerant? SAE J639 Pressure Relief Devices Oil Separator [CO ]