生物燃料加工设备设计与应用论文.doc

生物燃料加工设备设计与应用毕业论文 目录 中文摘要 I 英文摘要 II 引言 1 第1章 生物质燃料加工设备发展综述 2 1.1发展生物质燃料的意义 2 1.2我国生物质燃料发展现况 2 1.3发展生物质燃料加工设备的现实意义 2 第2章 生物质燃料加工设备的结构及工作原理 4 2.1典型切碎机结构及工作原理 4 2.2现有典型生物质燃料成型设备的结构和工作原理 8 第3章 主要设计方案的确定 10 3.1切碎部分方案的确定 10 3.2压块成型部分方案的确定 10 3.3生物质燃料加工设备原理 11 第4章 设备各尺寸的设计 12 4.1切碎部分功率参数的确定 12 4.2压块部分功率参数的设定 12 4.3传动方案的设计和电机的选择 15 4.4带轮的设计 16 4.5刀架设计和刀具设计 18 4.6喂入辊的设计 20 4.7传动系统的设计 21 4.8曲轴设计 27 4.9其他零件的设计 29 结束语 31 参考文献 33 致谢 34  摘要 生物质燃料是指包括植物材料和动物废料等有机物质在内的燃料，是人类使用的最古老燃料的新名称。ABSTRACT Biomass fuel is plant material and animal waste and other organic substances, including fuel, is the new name of the oldest human use of fuel. Biomass fuel processing equipment is a shredder and crusher. The design regards straw as a biomass fuel representatives. The processing equipment into an entry point for small. Rural households or collectively as the main crowd.Straw coal production costs are as low as possible.So the chopper design as one with the briquetting machine.Farmers harvest processing the straw after straw coal, their reserved Fuel for Life. In order to facilitate coal burning straw, forming the shape of the final briquette everyday use honeycomb shape. Query based on available data, the last straw coal density of about 535kg/m3, production capacity of 500kg / h. Chopped part of the principle of using frame chopper, equipped with two knife knife, knife in order to maintain dynamic balance, the phase of the two knives staggered 90 °. After feeding the straw moving in the rotating blade and fixed blade in the rack under the action set to be chopped into a certain theoretical length (10mm) of the broken section. Straw was chopped into briquettes under gravity part of the compression room. Briquetting part of the program using the punch type. Straw was chopped by the action of the binder punch press molding to the shape of the straw honeycomb block. In order to do part of the structure briquetting. KEY WORDS: honeycomb-like; frame shredding machines; punch-type; sinusoidal bod