三角函数_8-47（Delta function _8-47）.docVIP

三角函数_8-47（Delta function _8-47） The document comes from the network, it is my own collection organized, if have omitted, the error, still asks everyone to correct! Trigonometric function knowledge induction and typical examples 1, the idea of the Angle: a ray in the plane rotates from one position to the other The Angle of rotation formed by counterclockwise rotation is called a positive Angle, and the Angle formed by the rotation of the clockwise direction is called the negative Angle, and when a ray does not rotate, it is called a zero Angle The starting position of the ray is called the beginning edge, and the termination position is called the terminal edge 2, the concept of bearing: in rectangular coordinate system, the Angle of the vertex with the origin, the Angle of edge and the axis of the negative half axle load, the Angle which quadrant, the terminal side said this Angle is the Angle which quadrant If the end of the Angle is on the axis, it doesnt belong to any quadrant The same Angle at the end: (1) the end edge is the same as the final edge (the end of the end is in the ray). Note: the end of the same Angle must be the same, and the same Angle may not be equal. It is the same as the end of the Angle, and the smallest Angle of absolute value is _ (2) the end and end of the line (the end of the end line). (3) the end and the end are axisymmetric. (4) the final edge and the end are axisymmetric. (5) the end and the end are symmetric about the origin. (6) the Angle at the end of the axis can be expressed as:; The Angle at the end of the axis can be expressed as:; The Angle at the end of the axis can be expressed as:. The end of the end of the line is symmetric in line, and is equal to ____________ 4. The final relationship of the relationship: defined by two halves, one, two, three, four. 3. If the second quadrant Angle is, it is ___ one and three ___ quadrants 5. Arc length formula: fan area formula: 1 radian (1rad). It is known that the perimeter of the f