土工格栅扫盲（Earthwork grille）.docVIP

土工格栅扫盲（Earthwork grille） Geogrid is divided into four categories: plastic geogas, steel and plastic geogrid, glass fiber geogrid and glass polyester geogrid. (1) the bidirectional geogrid is a kind of plastic products of plastic geogrid geogrid is formed by stretching with square or rectangular polymer material, according to the drawing direction when different for uniaxial tensile and two-way stretch of two kinds. It is extruded through extruded polymer sheets (mostly polypropylene or hdpe), and then directional stretching under heating conditions. The single-directional tensile grille is drawn only along the length of the plate, while the bidirectional tensile grille continues to stretch the grid of unidirectional stretching in a direction perpendicular to its length. Due to the rearrangement of polymer polymers in the manufacture of plastic geogrid, the bonding force between the molecular chains is strengthened and the purpose of enhancing the strength is achieved. Its elongation rate is only 10% ~ 15% of the original plate. If the anti-aging materials such as carbon black are added to the geotextile grille, it can have good resistance to acid, alkali resistance, corrosion resistance and aging resistance. Two - way geotechnical grid Paving surface grid construction points for attention of geogrids should be relatively smooth, paving layer after receiving qualified experience, to prevent the longitudinal askew phenomenon, paving layer according to the width in the first draw white lines or hang line, paving, can begin then use nails fixed grid end (every 8 meters wide with nail root, evenly distance fixed), fixed grid after the end, the grille with finisher slowly pull forward shop, shop every 10 meters long for artificial taut and straightening time, until a roll of grille spread out, then spread to the next scroll, with before operation, after laying a roll with 6 t - 10 t roller rolling forward direction from its starting point again, (such as paving on the sur