基于DSP2812的SVPWM波形实现程序.docxVIP

基于DSP2812的SVPWM波形实现程序// file name: svpwm.c//generate svpwm waveforms#include math.h#include DSP281x_Device.h // DSP281x Headerfile Include File#include DSP281x_Examples.h#include stdio.h // DSP281x Examples Include File//global variablesfloatTz=2e-4;intVdc=600;//float PI=3.1415;//int f=50;// Prototype statements for functions found in this file.voidsvpwm(float *ptr,floatuapha,floatubeta,floatTswitch,intvdc_link);voidinit_eva(void);void main(void){float cmpr[3]={0,0,0};//cmpr[3]={CMPR1,CMPR2,CMPR3)float *ptrc=cmpr[0];//point to the addrs of cmprfloatv_aphar=100;//reference value of vapharfloatv_betar=-20;//reference value of vbetar//float tstep=0.0000001;//float tend=5//float w=2*PI*f;//float y=sin(w*t);// Step 1. Initialize System Control:// PLL--30MHz*10/2, disable WatchDog, enable Peripheral Clocks// This example function is found in the DSP281x_SysCtrl.c file.InitSysCtrl();// Step 2. Initalize GPIO: // This example function is found in the DSP281x_Gpio.c file and// illustrates how to set the GPIO to its default state.InitGpio();// Step 3. Clear all interrupts and initialize PIE vector table:// Disable CPU interrupts DINT; //asm( setc INTM)// Initialize the PIE control registers to their default state.// The default state is all PIE interrupts disabled and flags// are cleared. // This function is found in the DSP281x_PieCtrl.c file. //InitPieCtrl();// Disable CPU interrupts and clear all CPU interrupt flags: IER = 0x0000; IFR = 0x0000;// Initialize the PIE vector table with pointers to the shell Interrupt // Service Routines (ISR). // This will populate the entire table, even if the interrupt// is not used in this example. This is useful for debug purposes.// The shell ISR routines are found in DSP281x_DefaultIsr.c.// This function is found in DSP281x_PieVect.c.// InitPieVectTable();init_eva();svpwm(ptrc,v_aphar,v_betar,Tz,Vdc);EvaRegs.CMPR1 = cmpr[0]*75e6;EvaRegs.CMPR2 = cmpr[1]*75e6;EvaRegs.CMPR3 = cmpr[2]*75e6;}//**************************