模型飞机制作（Model aircraft production）.docVIP

模型飞机制作（Model aircraft production） Homemade aircraft model - geek fan () Here I will tell you about my design and production process, and I hope to help friends who want to do the model aircraft. Wrong, but also hope that we can exchange and improve together. Its not too difficult to make a model plane according to the ready-made drawing. However, if you design a plane according to your needs, Im afraid it will be challenging. When you want to start designing, you will encounter a lot of problems that need to be solved. Such as: why choose this airfoil, wingspan and wing chord is how to determine, the length of the fuselage should be how much, the size of the fin area, where the components should be placed, and so on. Fortunately, now more books, as long as careful study, induction, you can find the answer. According to what I have learned, I designed and made my rookie No. 1. The first step, the overall design. 1. Definite airfoil. We have to choose different airfoils according to the different uses of the model aircraft. There are many airfoils, thousands of them. But in conclusion, the airfoil of an airplane is roughly divided into three kinds. One is the flat convex airfoil, which is characterized by high lift, especially at low speed. However, the resistance, and not very suitable for inverted. The airfoil is mainly used in the exercise machine and machine like. Two is a doubly convex airfoil. The symmetrical airfoil is characterized by the lift at a certain angle of attack and no lift at zero angle of attack. The plane to fly when the pitch of head change little in it and. This airfoil is mainly used in the stunt machine. Three are concave convex airfoils. The airfoil has greater lift, especially at slow speed. The lift performance is better than that of other airfoils, but the resistance is larger. The airfoils are mainly used on gliders and special aircraft. In addition, the wing thickness is also exquisite. The same airfoil, large thickness, low lift, but gr