64位Win7下VMWare8安装MacOSXLion系统完美解决方案.docxVIP

64位Win7下VMWare8安装MacOSXLion系统完美解决方案64位Win7下vmware8安装MacOSXLion系统完美解决方案准备工作：所需工具下载地址：/download/asmcvc/4162080VMWare8的下载及其安装不再说了，这边先把MacOSXLion系统下载下来。我本人是64位Win7，需要开启VT，不然后面vmware8安装的Mac系统时会弹出类似如下错误：You have configured this virtual machine to use a 64-bit guest operating system.? However, 64-bit operation is not possible. This host is VT-capable, but VT is disabled.This is usually because VT has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. Please:(1) Verify that the BIOS/firmware settings enable VT and disable ‘trusted execution.’(2) Power-cycle the host, if either of these BIOS/firmware settings have been changed.(3) Power-cycle the host, if you have not done so since installing VMware Workstation.(4) Update the host’s BIOS/firmware to the latest version.For more detailed information, see?/info?id=152.Continue without 64-bit support?重启计算机（真机）F2进入BIOS设置，找到Advanced-CPU Setup，设置Intel(R)Virtualization?Technology为Enable，然后保存并退出，启动计算机。?详细步骤：1.新建虚拟机系统打开vmware8菜单File-New Virtual Machine Wizard：选择Custom(advanced)然后Next。?选择Workstation 8.0并Next。??选择“I will install the operating system later”，也即最后安装操作系统，然后Next。??选择操作系统为“Other”，Version为“FreeBSD 64-bit”，然后Next。?为此虚拟机系统起个名字，例如“MacOSX_Lion”，然后选择一个保存位置，例如“D:\Virtual Machine\MacOSX_Lion”，然后Next。?选择双核处理器，然后Next。设置内存大小，例如2048MB，也就是2GB，然后Next。?设置上网方式为NAT方式，然后Next。?选择默认的“LSI Logic (Recommended)”?，然后Next。?选择“Create a new virtual disk”，然后Next。?选择默认的“SCSI (Recommended)”，然后Next。?然后是设置硬盘大小，最低要求20GB，我设置了60GB，其他的不用选择使用默认即可，然后Next。?直接Next。?点击Finish，至此虚拟机系统新建完成。?2.配置虚拟机系统。?删除软盘。?光驱高级里面设置为SCSI模式。显卡的3D加速模式打开，不然会很卡。配置好后，再修改下MacOSX_Lion.vmx文件，使用记事本打开找到“guestOS =?”这一行并修改为：guestOS = darwin10然后在其后增加以下内容：guestOS = darwin10cpuid.1.eax = 0000:0000:0000:0001:0000:0110:1010:0101?keyboard.vusb.enable = TRUEmouse.vusb.enable = TRUEmonitor.virtual_exec = hardwaremonitor.virtual_mmu = softwareich7m.present = TRUEsmc.present = FALSE需要注意的是cpuid.1.eax = 0000:0000:0000:0001:0000:0110:1010:0101比较重要，如果没有