基础接地（Based on the ground）.docVIP

基础接地（Based on the ground） Lightning protection and grounding concealment engineering construction scheme (2011-07-07 11:00:13) reprint print Tags:. A lightning protection and earthing system: All sorts of grounding system of common grounding grid, using TN-S system, the design requirements of the grounding resistance is less than 1 ohms. Pile foundation and pile cap and beam steel mesh welding connected to form the basis of reliable grounding the grounding device, lightning protection downlead reinforced by column or shear wall in two with a diameter of 16 mm above, welding with upper and lower welding and roof lightning protection, grounding device, installed lightning protection belt is arranged in the roof wall daughter, concrete frame building the reinforcement in the network and lightning with reliable connected to form a lightning arrester, all outstanding roofing metal components or piping shall be welded and communicated with the roof lightning belt in the bathroom for local equipotential bonding. Two, construction deployment: 2.1 construction process: basic grounding electrode welding, lead, equalizing ring welding, welding, roof lightning with equipotential bonding and earthing test well construction and grounding resistance test 2.2 the construction progress control points: The 2.2.1 level of grounding body and pile pile four main reinforcement concrete pouring pile inserted in the welding operation to beam outlet elevation. The 2.2.2*** column base level grounding body welding column inserted in the basal layer of rebar after * * *. The 2.2.3 of each layer of local equipotential bonding in the bathroom floor after insertion of rebar. 2.2.4 roof lightning protection belt inserted after the cap structure in civil engineering. In the civil engineering after the cap structure is inserted into the 2.2.5 test wells. The 2.6 stages of testing grounding resistance: Based on the 2.6.1 electrode in the process of construction, testing ground soil resistivity withi