第六章 管道（The sixth chapter pipeline）.docVIP

第六章 管道（The sixth chapter pipeline） This paper consists of 164568694 contributions DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Non - slotting construction of underground water supply and drainage pipeline 1. Application of slotted construction two. 1. characteristics and existing problems of 2. problems of three slotted construction features. Slotted construction type 1. driving pipe jacking 2. extruded soil shield lining forming 3. pipe jacking pipe or pipe gallery (a) for driving pipe jacking pipe construction machinery operation and installation of pipe diameter by artificial digging when the general should not be less than 900mm, the spiral boring machine, usually 200-800mm 1. artificial driving pipe jacking working pit location (1) is chosen in the pipeline of the auxiliary structures position, such as gate wells or wells check. (2) there are available pit walls and undisturbed soil for the back. (3) when one way jacking, the working pit should be installed downstream of the pipeline. The general type of pit, one-way pit, two-way pit, multi pit, steering pit, intersection pit. Construction methods of working pit (1) trough type, caisson type and continuous wall type. The pit base (1) soil tank foundation soil pillow (2) pebble wood foundation (3) concrete sleeper rail foundation: Its function is to push the pipe into the ground according to the design requirements, so as to ensure the correct position of the pipe before it is to be pushed into the earth. Back wall and back: the depth is 2~4m, and the length of the back wall needs 4~7m. The affiliated facilities work pit (1) working table (2) shed (3) top 2. mechanical equipment imported into the top A. machinery, digging and filling (1) umbrella type excavator (2) spiral boring machine (3) manipulator excavator B. shield connecting the top C. hydraulicking 3. pipe jacking jacking when the tube is connected