航模电池选择（Battery selection）.docVIP

航模电池选择（Battery selection） Model cell classification There are many kinds of rechargeable batteries, but they require large energy density, light weight and large discharge current. They are mainly used in Ni Cr batteries, Ni MH batteries and Li ion batteries. The internal resistance of rechargeable battery is low, and short circuit is avoided when it is used, otherwise it may cause scald and fire. The nickel cadmium battery (Ni-CD) is mainly characterized by excellent high current discharge performance, and meets the requirements of short time and high power requirements for model aircraft. An important performance index of rechargeable batteries is discharge rate. Discharge rate is the ratio of the maximum continuous discharge current of a battery to its nominal capacity current (C). C stands for a current with a small discharge, or a current of nominal capacity of 1C. Usually a numeric representation is added before the capacity C. For example, the discharge rate of a 1800 Ma battery is 10 C, which means that the maximum continuous discharge is 18A, so the discharge rate is an important index to measure the discharge performance of the battery. Because of the difference in production process and structure, the discharge rate of different brands of batteries is often different. Domestic nickel separator battery is generally 6C~12C, imported batteries are usually higher, especially for model aircraft dedicated power batteries, often up to about 20C, excellent SANYO batteries even higher than 40 C. Select the battery first is to choose a high discharge rate of the battery. But the energy density of Ni Cd battery is small, and it has the memory effect. The waste battery will pollute the environment more quickly and will be eliminated. It is only used in the case of large current output. NiMH rechargeable battery (Ni-MH) is a kind of environmental protection, the use of performance and charging as well as nickel cadmium battery, the nominal voltage is 1.25 volts, but h