Standard Test Method for - watermelon ketone标.doc

ASTM Designation: D4607-94 Standard Test Method for Determination of Iodine Number of Activated Carbon 1. Scope 1.1 This test method covers the determination of the relative activation level of unused or reactivated carbons by adsorption of iodine from aqueous solution. The amount of iodine absorbed (in milligrams) by 1g of carbon using test conditions listed herein is called the iodine number. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7. 2. Referenced Documents 2.1 ASTM Standards: C819 Test Method for Specific Surface Area of Carbon or Graphite D1193 Specification for Reagent Water D2652 Terminology Relating to Activated Carbon D2867 Test Method for Moisture in Activated Carbon D3860 Practices for Determination of Adsorptive Capacity of Carbon by Isotherm Technique E11 Specification for Wire-Cloth Sieves for Testing Purposes E177 Practice for Use for the Terms Precision and Bias in ASTM Test Methods E287 Specification for Laboratory Glass Graduated Burets E288 Specification for Laboratory Glass Volumetric Flasks E300 Practice for Sampling Industrial Chemcials 2.2 NIST Publication: Circular 602---Testing of Glass Volumetric Apparatus 3. Summary of Test Method 3.1 This test method is based upon a three-point adsorption isotherm (see Practisces D3860). A standard iodine solution is treated with three different weights of activated carbon under specified conditions. The carbon treated solutions are filtered to separate the carbon from the treated iodine solution (filtrate). Iodine remaining in the filtrate is measured by titration. The amount of () removed per gram of carbon is determined for each () and the resulting data used to plot an (). The amount of iodine adsorbed