原地驾驶（In situ driving）.docVIP

原地驾驶（In situ driving） (a) in the car driving process Content: Be familiar with vehicle operation parts, switches, meters, functions and usage. Knowledge of vehicle inspection items. Get on and off the car. Throttle, clutch, hand and foot brake method of use. Steering wheel play. Local shift and downshift. Engine start and stop. First, familiar with the vehicle operating parts, switches, meters name, role and use. Operating parts: mainly steering wheel, transmission lever, hand brake lever, brake pedal and clutch pedal, ignition switch. Instrument: gasoline meter (lamp), oil pressure gauge (lamp), water temperature meter, speed meter, etc.. Good habit of observing and monitoring can bring useful help to safe driving and skillful operation. Two. Understanding of vehicle inspection items 1. Before running out, check the items: fuel oil, fuel quantity, cooling water, hand and foot brake device, horn, light, wiper, steering device, instrument, tyre pressure, tyre nut, etc.. 2 、 inspection items during driving: all kinds of instrument work. To convey the work of the Department, the hands and feet brake function is normal; the engine and chassis are no noise and odor; parking time to check whether there is oil leakage, water leakage, air leakage. 3, after closing the car inspection items: check and replenish oil, oily oil, cooling water tire etc.. Three 、 get on and off the car and correct driving posture. Get on and off: The student on the bus will turn from the back of the body to the front left and get in the car. The student who gets off will return to the carriage from the left. Substitution in coach carriage. The passengers who are on the bus turn to the front and get on at the left front gate. The students get off the bus at the back door, and the students move to the right and take turns. The order of motion into the cab: Before you open the door, look around and pay special attention to the rear vehicle and open the door without impeding the normal running of othe