去耦电容（Decoupling capacitors）.docVIP

去耦电容（Decoupling capacitors） What are the interference suppression devices used in the microcontroller system, 2007-09-19, 15:041. decoupling capacitors, and a decoupling capacitor between each power source and ground of the integrated circuit, which can filter out high-frequency noise from the power supply. As an energy storage element, it absorbs or provides the current change (di/dt) caused by the conduction and cut-off of the triode in the IC, thus reducing system noise. To choose the good performance of high frequency monolithic ceramic capacitors for decoupling capacitor or capacitors. A power storage capacitor shall be placed in place where each printed circuit board power is introduced. Because the winding structure of electrolytic capacitor has larger inductance, it can hardly filter the high frequency interference signal. Use with decoupling capacitors when used. Tantalum capacitors are better than electrolytic capacitors. The ferrite core 2. to suppress the high frequency inductor with thick enameled wire has several holes into the axial, constitutes a high frequency control device. String it into the power line or ground wire to prevent the introduction of high frequency signals from the power / ground. The device is particularly suited for powering analog circuits, digital circuit areas, and high-power drive regions separated from a printed circuit board. It should be noted that it must be placed between the energy storage capacitor and the power supply of the area, not between the energy storage capacitor and the appliance. 3. self restoring fuse, a device made of a new type of polymeric material, whose DC resistance is only a few tenths of a second when the current is below its rated value. And the current to a certain extent, its resistance rise rapidly, causing fever, and the more hot resistance, thereby blocking the power supply current. When the temperature drops, it will automatically return to normal. This device prevents CMOS devices from trigge