2011年ugnx-cad认证考试理论概念题（2011 ugnx-cad certification examination theoretical concept）.docVIP

2011年ugnx-cad认证考试理论概念题（2011 ugnx-cad certification examination theoretical concept） A single choice [a total of 60 questions, each question 1 points, a total of 60 points. Of the many options given in each of the following questions, only one is best suited to the requirements of the examination. Please select the appropriate answer. ] 1. the reference plane associated with the geometry is (). A) fixed reference (B) absolute benchmark C) relative benchmark (D) attachment benchmark 2. () display styles display objects only with edge geometry. The rotated view must be manually updated to correct the display. A) a wireframe with hidden edges B) static wireframe C) a wire frame with a graduated edge D) local coloring The 3. () function creates an expression that compresses / extracts a special feature with value 1 or 0. A) activate expressions B) delete expressions (C) suppress expressions D) redefinition of expressions The 4. () option is not a method of assembling a component array in an assembly. A) linear B) from instance features C) arrays from reference sets D) round 5. () basically defines a new boundary type for the view, changing the display state of the view in the drawing page. A) aligned views B) view editing C) define view boundaries D) display of views The 6. draft order, can not be achieved (draft). A) from the side B) from plane C) tangent to a number of faces D) to the parting surface The 7. aligned view includes the alignment of the 5 views, where the base point of the first view in the selected view can be used as a base point to align all the views. A) level B) vertical C) overlay D) vertical and straight 8. () can rotate around the point. A) Click build, rotate model B) press and hold the center, then turn the Green Cross icon, then rotate the model C) click left and rotate the model D) press the left and right keys at the same time, rotate the model 9. when the reference set of components is used in the assembly file, if the reference set is delete