pcb设计技巧疑难解析（Design of PCB for troubleshooting）.docVIP

pcb设计技巧疑难解析（Design of PCB for troubleshooting） This article by Yang Zhenwen with fish DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. 2, how to avoid high frequency interference? How to avoid high frequency interference? The basic idea of avoiding high frequency interference is to minimize the interference of high frequency signal electromagnetic fields, which is called crosstalk (Crosstalk). The distance between the high speed signal and the analog signal can be pulled up, or the ground guard/shunt traces is added beside the analog signal. Also pay attention to the noise jamming to the analog ground digitally. 3, in high-speed design, how to solve the integrity of the signal? In high-speed design, how to solve the integrity of the signal? Signal integrity is basically a problem of impedance matching. The factors that affect impedance matching include signal source architecture and output impedance (output, impedance), characteristic impedance of line, load characteristic, routing topology (topology) architecture and so on. The solution is by terminating (termination) and adjusting the routing topology. 4, how is the differential distribution pattern implemented? How is the differential distribution pattern implemented? There are two points in the routing of differential pairs. One is that the lengths of the two lines should be as long as possible, and the other is the spacing of the two lines (which are determined by differential impedances), which is to remain the same, that is, to keep parallel. There are two parallel ways, one for the two lines, the same on the line (side-by-side), one for the two lines, and two for the upper and lower levels (over-under). In general, side-by-side implemented more ways. 5, for a clock signal line with only one output, how do I realize differential distribution lines? For a clock signal line with only one output, how do I achie