晶锐保养知识（Jingrui maintenance knowledge）.docVIP

晶锐保养知识（Jingrui maintenance knowledge） Said Paul, running, first pull high speed, oil and additives mixed Although the statements of a school but it is original, not necessarily to welcome the exchange. Code word is more tired, reprint please indicate source and author. [about running in] The concept of running in can be divided into two kinds: the running in of the small concept means the running in of the engine; the running in of the big concept is the running in of the whole vehicle. Engine running in. Before the engine, due to material science, production process, processing precision and other reasons, relatively poor precision between the engine cylinder and piston ring, so it is very important and demanding running, and even can be said to be a specialized knowledge, after a certain period of time and mileage of the engine running, between the piston and cylinder wall will be more smooth smooth, efficient. With the development of Material Science (more wear), the production process (such as low temperature, precision assembly) (now the factory has already run engine cylinder wall than before more smooth) technology progress, now the concept of running desalination gradually, and even some models have clearly does not require the engine running in. And because of the influence of old ideas, people never abandon this concept. The gearbox can also refer to the engine running, but relatively speaking, the engine working condition and sliding friction tend to more worse \p (high temperature), internal transmission is more rolling friction, so the transmission oil does not need to like the engine so frequently, more can be ignored in the role. Full car running in, this is still very important. This is after a vehicle factory, after a period of time using the bumps, the suspension parts may appear some screws loose, the need for second times in the period after the fastening, then there are many parts in the service life of the vehicle is the basic need to move (unl