网站大量收购独家精品文档,联系QQ:2885784924

锂聚合物电池使用注意事项(Notes on the use of lithium polymer batteries).doc

锂聚合物电池使用注意事项(Notes on the use of lithium polymer batteries).doc

  1. 1、本文档共14页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
锂聚合物电池使用注意事项(Notes on the use of lithium polymer batteries)

锂聚合物电池使用注意事项(Notes on the use of lithium polymer batteries) I. matters needing attention in the operation of the electric core Since the core is a flexible package, the electrical core must be carefully operated to ensure the performance of the core is free from damage. 1. aluminum foil packing materials Aluminum foil packaging materials are vulnerable to sharp parts such as nickel chips and sharp pins. Batteries are not to be hit with sharp parts Should clean the working environment, avoid sharp parts exist Dont pierce batteries with nails or other sharp tools Batteries and metal objects, such as necklaces and hairpins, are not to be transported or stored 2. top banding The top edge closure is very vulnerable Do not bend the top edge 3. fold The hem has been completed during battery production and has passed the seal test. Do not open or break the hem 4. lugs The mechanical strength of the lugs is not exceptionally strong, especially aluminum. Dont bend the pole 5. mechanical impact No falling, impact, bending, electric core Do not hammer or trample batteries with a hammer No knocking or throwing batteries. 6. short circuit Short circuit core is prohibited at any time, which will cause serious damage to the core Prohibit the use of metal objects such as wires short-circuit connection battery positive and negative Two. Standard environment of polymer lithium ion battery test Ambient temperature: 20 + 5 Relative humidity: 45~85% Before testing, the battery should be discharged first Three note of charge and discharge of polymer lithium ion electric fan 1. charge Charging current and charging voltage shall not exceed the following standards, such as exceeding the specified value, may cause damage to the charge and discharge performance, mechanical performance and safety of the core, and may lead to heat and leakage. Battery charger must be able to charge constant current and constant voltage; Charging battery current must be below 1C5A when charging; When charging, th

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档