高层结构设计需要控制的七个比值及调整方法(转自user的博客)_ybbxk的建筑结构学习园地（The tall structure design requires seven ratios to be controlled and the adjustment method (the blog from user), _ybbxks architecture, learning garden）.docVIP

下载本文档

3
0
约1.29万字
约 10页
2017-08-17 发布于河南
举报
版权申诉

高层结构设计需要控制的七个比值及调整方法(转自user的博客)_ybbxk的建筑结构学习园地（The tall structure design requires seven ratios to be controlled and the adjustment method (the blog from user), _ybbxks architecture, learning garden）.doc

1、本文档共10页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

高层结构设计需要控制的七个比值及调整方法(转自user的博客)_ybbxk的建筑结构学习园地（The tall structure design requires seven ratios to be controlled and the adjustment method (the blog from user), _ybbxks architecture, learning garden） Seven ratios and adjustment methods needed to control the design of high-rise buildings The difficulty of high-rise design lies in the rational arrangement of vertical bearing members (columns, shear walls, etc.), and the target parameters in the design process are as follows: seven: I. axial compression ratio: mainly to limit the axial compression ratio of the structure, to ensure the ductility of the structure, the specifications have the corresponding limit requirements for the walls, limbs and columns, see the anti gauge 6.3.7 and 6.4.6, high gauge 6.4.2 and 7.2.14 and the corresponding provisions. When the axial compression ratio does not meet the requirement, the ductility requirement of the structure can not be guaranteed; the axial compression ratio is too small, which shows that the economic and technical indexes of the structure are poor, so it is appropriate to reduce the sectional area of the corresponding wall and column properly. Adjustment method when axial pressure ratio is not satisfied: 1, program adjustment: SATWE program can not be achieved. 2, manual adjustment: increase the wall, column section, or raise the floor wall and column concrete strength. Two, shear weight ratio: mainly to limit the floor of the minimum level of seismic shear, to ensure a longer period of structural safety, see the anti gauge 5.2.5, high regulation 3.3.13 and the corresponding provisions. This requirement, like the minimum reinforcement ratio, requires that the horizontal seismic shear force be artificially improved if it fails to meet the minimum requirements of the specification and that subsequent calculations shall be carried out at this minimum requirement. Adjustment method when the shear weight ratio is not satisfied: 1, adjust the program: the SATWE adjustment of i