锚杆技术在昭麻公路边坡治理中的应用（Application of anchor technology in slope control of Zhao Ma highway）.doc

锚杆技术在昭麻公路边坡治理中的应用（Application of anchor technology in slope control of Zhao Ma highway） Application of anchor technology in slope control of Zhao Ma highway Wang Juefei, Zhang Zhenyi, Li Wei (nuclear industry east China Construction Engineering Group Corporation, Nanchang 330046) Abstract: combined with Yunnan Zhao (Tong) - MA (Liu WAN) three highway slope construction practice in geological condition is very unstable, multi landslide, comprehensive treatment technology with bolt and cable technology based on the research and application of high slope collapse area, the slope failure types, formation methods and measures the mechanism and governance are discussed. Key words: road engineering; anchor technology; highway slope control; application 0 Preface Zhao Ma Road along the river east and west sides laid off, steep slopes, alpine cross-strait confrontation, gully and slope collapse accumulation fell rockconditions covered in a granular surface myitsone shape; geological lithology is fourth period slope residual debris, the lower the siliceous limestone rock quartz sandstone, Sandy Rock with carbonaceous shale and mudstone. In the rock area, most joints and fissures are developed, broken and loose. In some sections, the groundwater is rich and the hydrogeological conditions are complicated. We use the method of comprehensive treatment are: spray anchor net supporting frame and prestressed anchor cable, anti slide pile with prestressed anchor cable, anti slide pile, retaining wall, arch skeleton supporting, drainage hole, drainage ditches and so on, this paper only focuses on the spray anchor net supporting, prestressed anchor frame, elaborates the application process pile of prestressed anchor cable anti slide. 1 brief description of slope 1.1 types of slope failure Under the gravity action of the upper rock mass, the 1.1.1 creep causes a long slow deformation of the strata in the table, and is mainly characterized by the shear displacement between the blocks and