氯碱工业中固、液两相流泵选用分析（Selection and analysis of solid and liquid two phase flow pump in chlor alkali industry）.docVIP

氯碱工业中固、液两相流泵选用分析（Selection and analysis of solid and liquid two phase flow pump in chlor alkali industry） Selection and analysis of solid and liquid two phase flow pump in chlor alkali industry Abstract: as the conveying medium is different, the solid content of the conveying medium, the size of the solid particles and the degree of hardness of the particles, The synthetic viscosity of solid and liquid, as well as the degree of material, corrosion and abrasion, the type of pump used in production There will be differences. Therefore, the various operating conditions must be carefully analyzed. Key words: solid and liquid two phase flow pump; selection; chlor alkali industry 1 Overview In the production of chlor alkali industry, liquid containing solid particles is often needed, such as salt sludge and calcium carbide slag slurry, Desulfurization slurry, sewage treatment, PVC suspension, ash slurry conveying cheng. As the transport medium is different, The solid content of the conveying medium, the size of the solid particles, the degree of hardness and hardness of the particles, and the comprehensive viscosity of the solid and liquid phases And the material, corrosion and abrasion degree is different, choose production pump type will also be different. Some mines are suitable for use The volume of chestnut is conveyed, while others are transported by special centrifugal pumps (salt sludge pump, PVC suspension) Liquid pump, slag chestnut, ceramic pump, high suction pressure centrifugal pump, vortex pump). Choose the right delivery pump and reliable Shaft seal can satisfy the process operation conditions, and can achieve long-term stable operation and reduce pump energy consumption The comprehensive technical and economic indexes such as investment and operating expenses shall be in line with the principles of economy, safety and application. 2 basic requirements for selection of solid and liquid two phase flow pumps in chlor alkali production units (1) first of all,