汽车简单原理（Simple principle of car）.docVIP

汽车简单原理（Simple principle of car） The differential has three functions: Point the engine power to the wheel The final drive reducer on the vehicle reduces its rotational speed for the last time before the transmission hits the wheel The transmission of power to the wheel during rotation at different speeds (which is called the differential) This article will introduce the reasons for the cars differential and the role and disadvantages of the differential. We will also introduce some anti slip differentials, also known as limited slip differentials. Why is the differential required? The speed at which the wheels rotate is different, especially when turning. In the following animation, you can see each wheel travels at different distances during the turn, and the inner wheel is shorter than the outer wheel. Because the speed is equal to the distance traveled by the distance traveled by the distance, the shorter wheel travels at a lower speed. Also note that the front and rear wheels travel at different distances. This is not a problem for a non - drive (rear wheel drive, front wheel or front wheel drive of a car). Because there is no connection between the front wheel and the rear wheel, they rotate independently. But the drive wheels are connected so that a single engine and a transmission can rotate the two wheels simultaneously. If the car does not have a differential, the wheels must be locked together so as to rotate at the same speed. In this way, the car will not be easy to turn - a tyre must slide in order for the car to turn. For modern tyres and concrete pavements, tyres need a lot of power to slide. This power must be transmitted from one wheel to another by the shaft, which creates a great amount of pressure on the shaft assembly. What is the differential? A differential is a device that separates engine torque in two directions, allowing each output torque to rotate at different speeds. Now all cars or trucks are equipped with differentials, and some all w