浅析高层建筑电气管路预留预埋（Preliminary analysis of reserved pre embedding of electric pipe in high-rise building）.docVIP

浅析高层建筑电气管路预留预埋（Preliminary analysis of reserved pre embedding of electric pipe in high-rise building） The number, fan coil, electric power construction drawing stroke location has many construction plans and corresponding ventilation; fire sprinkler system of air compressor in the fire construction drawings as required in the power supply, and no electric drawings reflect; linkage control plane does not match the fire box position and automatic fire alarm fire plan; Hall lantern embedded fixed iron a, no mark of civil structure drawings; building drawings and electrical plan part of the layout is inconsistent and so on. The reason is not timely communication with each other by professional designers to change the design. Through the professional department of trial in drawings, electrical pipelines embedded reserved before, in advance to avoid some design flaws and mistakes, make the professional integrated pipeline plan, elevation, section, to optimize the layout of the engineering design, for the subsequent construction in advance to prepare, better to complete the installation work. Two, the use of pre control function Now there are many high-rise buildings in the construction stage can not determine the final plan, the construction unit according to changes in the market is about to enter the construction site or has completed construction of continuous adjustment of function layout or construction. If the function is not clear the building especially in shopping malls or entertainment venues, according to the design drawings of preformed and embedded electrical lines, often because they do not meet the requirements of subsequent owners and cause great waste. For example, a commercial project, one or two 8000 square meters of shops in the main construction in electrical line according to the original design drawings were preformed and embedded into the end, the main construction, the construction unit to adjust the requirements of the shop layout, to the complet