深入剖析电感电流 ――dcdc 电路中电感的选择（Deep analysis of inductance current - the choice of inductance in DCDC circuit）.doc

深入剖析电感电流 ――dcdc 电路中电感的选择（Deep analysis of inductance current - the choice of inductance in DCDC circuit） In depth analysis of inductance current - DC/DC circuit selection of inductors (turn): Fairchild Semiconductor AB-12:Insight into Inductor Current Download Translation: FRM (note) only by fully understanding the role of inductors in DC/DC circuits can a better design of DC/DC circuits be achieved. This article also includes an explanation of the concepts of synchronous DC/DC and asynchronous DC/DC This article PDF document download brief introduction In the design of switching power supply, the design of inductance brings many challenges for engineers. The engineer not only selects the inductance value, but also considers the inductance, the bearable current, the winding resistance, the mechanical size and so on. This paper focuses on the interpretation of the DC current effect on inductors. This will also provide the necessary information for selecting the proper inductor. Understand the function of inductors Inductance is often understood as the L (C is the output capacitor) in the LC filter circuit at the output of the switching power supply. Although this understanding is correct, it is necessary to know more about the behavior of inductors in order to understand the design of inductors. In the buck conversion (Fairchild typical switching controller), one end of the inductor is connected to the DC output voltage. The other end is switched to the input voltage or GND by switching frequency. In status 1, the inductance is connected to the input voltage via the (high side, high-side) MOSFET. In status 2, the inductance is connected to the GND. With this type of controller, inductance grounding can be achieved in two ways: by diode ground or by MOSFET (low side low-side) ground. In the latter way, the converter is called synchronous (synchronus) mode. Now consider again if the current flowing through the inductor in these two states is varied. In the status 1 pro