现浇框架结构钢筋绑扎工艺标准 (409-1996)（Standard for reinforcement of cast-in-place frame structure (409-1996)）.docVIP

现浇框架结构钢筋绑扎工艺标准 (409-1996)（Standard for reinforcement of cast-in-place frame structure (409-1996)） The cast-in-place frame structure of steel banding process standards (409-1996) Range This technology is applicable to industrial and civil building multilayer cast-in-place frame, frame shear wall structure of reinforced banding engineering. Construction preparation The 2.1 main materials and equipment: 2.1.1 bar: should have the certificate, according to the provisions for mechanical test. When the brittle fracture and other special circumstances occur during the machining process, the need for chemical composition analysis. There should be no old rust and dirt. 2.1.2: the forming steel must meet the specifications, size, shape, number of single ingredient, and its processing factory certificate. 2.1.3 wire: can use 20 ~ 22 wire (fire wire) or galvanized wire (Qian Si). Cut the wire length to meet the requirement of operation. 2.1.4 pad: made with cement mortar 50mm square, with the thickness of protective layer, broken blocks embedded within the 20 to 22 fire wire. Or with a plastic card, reinforcement, supporting ribs. 2.1.5 main equipment: steel hook, crowbar, wrench, lashing wire rack, brushes, trolleys, chalk and rulers. 2.2 operating conditions: 2.2.1 reinforced approach should check whether the certificate and retest report, according to the specified construction plan in place, in accordance with the specifications and positions, numbers were padded wood piled up. 2.2.2 rebar should be examined before, no rust, rust and then transported to the binding part. Familiar with 2.2.3 drawings, according to the requirement of design inspection has been reinforced processing specifications, shape, number is correct. 2.2.4 to copy flat line work, play good level of the standard high, column and wall outer dimension line. 2.2.5 according to the linear elastic good skin size, location, number, check the length of lower starter bar, if you do not meet the requirements, sho