石英坩埚（Quartz crucible）.docVIP

石英坩埚（Quartz crucible） A: the history and current situation of the quartz crucible 1. early quartz crucible Early quartz crucible is all transparent, the early quartz crucible is all transparent structure, the transparent structure but is easy to cause the heat transfer conditions lead to uneven, increase the difficulty of crystal growth. This eliminated the basic use of the crucible. 2. modern quartz crucible The modern crystal quartz crucible is production by arc method and translucent, is drawing large diameter silicon based material is essential to the development of large scale integrated circuit The modern quartz crucible has two kinds of structure, outside is a layer with high bubble density region, known as the bubble composite layer is a layer of 3~5mm, inside the transparent layer, called bubble depletion layer. Bubble composite layer is intended to have a radiant heat source heater provided with uniform radiation. The bubble depletion layer to reduce contact with the solution region of the bubble density, and improve the success rate of crystal growth and crystal quality. Two: the analysis of the domestic situation of quartz crucible The quartz crucible manufacturers are: Jinzhou, Jingzhou, Yangzhou, Saint Gobain feilihua Wahl, Ningbo Bao Starr, Yuyao Tongda, Hangzhou and etc.. Jinzhou, Jingzhou, Yangzhou, Saint Gobain feilihua Wahl, vacuum melting method using their technology, several using the coating method, namely in the inner wall of the crucible with fine quartz sand spraying to the crucible surface about 1~2mm. Not evenly, which will result in the crystal growth process of crystal growth failed to lead off the wall. Ningbo Bao Starr a barium coating pot, can be applied to the crucible for solar crystal. Barium coated process can also be used manually, but the disadvantage is that the introduction of artificial barium coated superfluous impurities in barium coated simultaneously and artificial spraying is not uniform, so that at the beginning of the