码率解说（Rate interpretation）.docVIP

码率解说（Rate interpretation） RMVB video program in general can be divided into two categories. One is the fixed bit rate compression, compressed files generated by RM encoding, the file extension is.Rm. The other is a dynamic bit rate compression. Rmvb encoding, file suffix is.Rmvb. The dynamic compression rate can be divided into two categories. One is the maximum rate + average rate, the other is the maximum rate + video quality way. The connection and difference between them now speak Fixed rate: the amount of data per second video file contains a constant, if you press 500kbps/s compressed files, then the original file is higher than that of the 500kbps screen will be forced down to 500kbps, while the low and 500 will be filled to 500 (waste). The disadvantage is that the quality of the fixed rate encoding content is not stable. Because some pieces of content is more difficult than other compression fragments, so the quality of certain parts of the image than the other part of the difference. In addition, the quality of the fixed rate will lead to different adjacent flow. Usually at low bit rate, the quality of the change will be more obvious. Dynamic rate: the use of dynamic bit rate, the system will automatically allocate a few simple bit parts for the content, to set aside enough bits to generate high quality for complex part. The use of dynamic rate of mixed content, the size of the file under the same conditions, the output dynamic rate results than the fixed rate of the output quality is much better. In some cases, dynamic rate and fixed rate file files of the same quality, its size may be only half of the former. The maximum bit rate + average bit rate: the original file is higher than the maximum rate of the lower picture rate to maximum rate , lower than the average rate of increase to screen average rate. For example, the maximum rate is set to 1000, the average rate of 500, then the original picture file more than 1000 pictures will be forced to reduce t