矿图二（Mine map two）.docVIP

矿图二（Mine map two） 1. Mine Map: in mine design, construction and production management work, need to draw and use of a series of drawings. The coal development and production services of geological survey map, design drawings, production management etc. are collectively referred to as mine map. 2. a mine must have general drawings can be divided into three categories: geological survey map, design drawings, production management plan. Including the 3. coal mine design: Construction of new wells mine design, mine expansion design, mine design, horizontal extension mining design and individual engineering design etc.. 4. coordinate system: geographic coordinates, Cartesian coordinates system and assumed plane rectangular coordinate system. 5. in order to avoid cross coordinates negative axial West mobile 500km used to be transverse coordinates. It is located in the east of the central meridian points, the value of the abscissa is larger than 500km, located in the west of the central meridian points whose value is less than 500km, but is always positive. 6. only with coordinate grid drawings, coordinate grid with fine line drawing, composed of the side length of 100mmX100mm square, also can only draw the coordinate grid + intersection + word length is 20mm. 7. drawings are drawn on the coordinate grid, the compass should be painted in the upper right corner of the drawing, the arrow points to the north, and write the letter N. Coordinate with m as a unit, the abscissa is 8 digit (number of projection zone in which the top two), the ordinate is the number 7, according to the size of the digital label label direction. 8. in order to avoid the negative values of the coordinates, the coordinate origin is set in the test area to the southwest corner of the area, meridian to the X axis, the north is positive; since the origin of coordinates perpendicular to X axis straight line is the Y axis, so as to form the mine assumed plane rectangular coordinate system. 9. determine the