路面路基工程（Pavement subgrade engineering）.docVIP

路面路基工程（Pavement subgrade engineering） (1) the correct design of cross section of Subgrade (2) choose good roadbed with soil or stabilization of subgrade top (3) using the correct filling method, ensure the required degree of compaction of Subgrade (4) ensure the minimum height of fill subgrade (5) the right of the drainage design (6) the design of isolating layer, insulating layer, sand cushion (7) the construction of retaining structure, adopt slope reinforcement and protection measures 2, China has long been the subgrade soil classification basis and classification results? According to the classification: (1) the plastic properties of soils; (2) the characteristics of composition of soil particles; (3) the content of organic matter in soil Results: the classification of coarse-grained soil (rock soil, gravel soil), coarse grained soil (soil, sand soil, gravel), fine grained soil (silty soil, clay soil, organic soil) and special soils (loess, expansive soil, red clay, saline soil). 3, the main content of roadbed design? (1) selection section, determine the width and height of subgrade subgrade Subgrade (2) selection of embankment filling and compaction standard (3) determine the slope shape and slope (4) the arrangement of drainage system and drainage structure design (5) the design of slope protection and reinforcement (6) design of ancillary facilities 4, the change of water level of Immerseable embankment, seepage line (gradient curve) changes When diwai Tsutsumiuchi water level, water infiltration into the concave line, dynamic water pressure to the soil; when diwai water level drops, a convex line Tsutsumiuchi infiltration water level, dynamic water pressure to the soil outside. 5, the rigid pavement longitudinal and transverse joints between features. 6, pavement classification: rigid pavement and flexible pavement and semi-rigid pavement. 7, blind ditch: refers to the filling in the subgrade or foundation within the set pieces, gravel and other coarse grain