车刀的种类及用途（Types and uses of turning tools）.docVIP

车刀的种类及用途（Types and uses of turning tools） If you want to do something good, you must first sharpen the appliance. In order to do good cutting on the lathe, it is very important to prepare and use the cutter properly. Different jobs require different shapes of the cutting tool, different materials with different requirements of knife blade angle, the relationship between the position and speed should be relative to the tool and work material, the tool itself should have sufficient strength and hardness, wear resistance and heat resistance. Therefore, how to choose the tool material and the grinding of the tool angle are important considerations. Types and uses of turning tools The improvement and development of cutting tools is one of the most important topics in the development of metal processing today, because good tool materials can effectively and rapidly complete cutting and maintain good tool life. Commonly used lathe material has the following kinds: 1 high carbon steel: High carbon steel tool is a kind of carbon steel with carbon content between 0.8%~1.5%. After hardening and hardening, it is easy to temper and soften because of the friction in the cutting. It is replaced by other tools such as high speed steel and four. Generally only suitable for the cutting of soft metal materials, commonly used are SK1, SK2, SK7, and so on. 2 high speed steel: High speed steel is a steel alloy tool and common white, adding W, Cr, V and Co alloy elements such as carbon carbon content in 0.7~0.85%. For example, 18-4-4 high-speed steel contains 18% tungsten, 4% chromium, and 4% vanadium high speed steel. High speed steel cutting tool in the friction heat generated can be as high as 6000C, suitable for speed below 1000rpm and thread turning, commonly used high-speed steel turning tools, such as SKH2, SKH4A, SKH5, SKH6, SKH9 and so on. 3 non iron alloy cutting tools: This is the alloy of cobalt and chromium and tungsten, because it is difficult to machining, casting to manufa