钢筋混凝土构件的安全鉴定分析（Safety identification analysis of reinforced concrete members）.docVIP

钢筋混凝土构件的安全鉴定分析（Safety identification analysis of reinforced concrete members） Safety analysis of the | construction of reinforced concrete members Abstract: safety identification analysis of reinforced concrete members Keywords: component security identification 1 Preface In the housing security identification, the need for security identification of structural members throughout the house, first through the on-site visual inspection, may find the quality problems of reinforced concrete structures, the crack is one of the most common phenomenon. The cracks are the design errors, a A thing has its cause., raw material properties, construction quality defects and environmental conditions change, improper use, uneven foundation subsidence and so on, and the destruction of buildings usually begin with cracks. Therefore, how to identify cracks, analyze cracks and control cracks is one of the important contents of safety appraisal work. According to the causes and characteristics of cracks, the structure stress and working condition are judged, and the safety, applicability and durability of the structure are evaluated. This identification method is simple, intuitive and quick, and is widely used in house safety appraisal. Its disadvantage is that it is only a qualitative analysis method, and can not analyze the security of structure quantitatively. To this end, the suspected structural members should be checked for strength, stiffness and crack resistance, and load tests should be carried out when necessary, and then safety assessment opinions shall be made. Analysis of cracks in 2 reinforced concrete structural members To identify structural cracks or non structural cracks: many causes of cracks in reinforced concrete structures, the influence of the difference is also great, only understand the structure stress state and cracks on the structure, to the qualitative structure. Many structural cracks due to the structure of the stress reaches the limit, resulting in insuf