温湿度DHT11应用程序12864显示.docVIP

温湿度DHT11应用程序12864显示 #include reg52.h #include intrins.h #define uchar unsigned char #define uint unsigned int sbit data1= P1^0; sbit sid=P3^6;//数据口 sbit sclk=P3^7; sbit led=P2^0;//测试灯 sbit led1=P2^1; sbit led2=P2^2; sbit led3=P2^3; uchar lcd_x,lcd_y,data_byte=0; uchar count; uint U8T_data_H, U8T_data_L, U8RH_data_H, U8RH_data_L, U8checkdata; uint U8T_data_H_temp, U8T_data_L_temp,num, U8RH_data_H_temp, U8RH_data_L_temp, U8checkdata_temp; //unsigned char table[10]={0123456789}; //uchar int table1[8]; unsigned char str1[]={}; unsigned char str2[]={}; unsigned char code lcd[] = {温湿度检测系统}; unsigned char code lcd1[] = { 温度:}; unsigned char code lcd2[] = { 湿度:}; unsigned char code lcd3[] = {℃}; unsigned char code lcd4[] = {%RH}; void Delay2(uint z) { uint i; for(i=z;i0;i--) { for(i=0;i110;i--); } } void Delay_10us(void) { int i=5; i--; } uchar rece() { uchar i,temp ; for(i=0;i8;i++) { count=2; while((!data1)count++); // temp=0; Delay_10us(); Delay_10us(); Delay_10us(); temp=0; if(data1==1) temp=1; count=2; while(data1count++); if(count==1) break; //temp=0; data_byte=1; data_byte|=temp; } return(data_byte); } //12864的串口显示 void delay(uint z) { uint x,y; for(x=z;x0;x--) for(y=110;y0;y--); } void send(uchar byte) { uchar i; for(i=0;i8;i++) {sid=byte0x80; sclk=0; sclk=1; byte=1; } } void write_date(uchar date) { uchar star_date,hdate,ldate; //if(star==0) //star_date=0xf8;//写指令 //else star_date=0xfa;//写数据 hdate=date0xf0;//取高4位 ldate=(date4)0xf0;//取低4位 send(star_date); delay(1); send(hdate); delay(1); send(ldate); delay(1); } void write_com(uchar com) { uchar star_date,hdate,ldate; //if(star==0) star_date=0xf8;//写指令 //else //star_date=0xfa;//写数据 hdate=com0xf0;//取高4位 ldate=(com4)0xf0;//取低4位 send(star_date); delay(1); send(hdate); delay(1); send(ldate); delay(1); } void lcd_dis_code(uint