染发技术（Hair dye technology）.doc

染发技术（Hair dye technology） 4 studies on color and hair color 1., hair color professional process (1) consultation: Understand the current color and hair status of the customer; Figure out the basic depth of the customers hair (chromaticity is from 1 degrees ~10 degrees); Find out the target color that customers decide to dye, namely, hue and hue (depth and color); To choose the correct dioxygen milk (water); When the hair dyeing requirements on the two section color, color should be out the two primary colors, and the use of different percentages of stained sections dioxygen milk (water). (2) check: Check the scalp condition, that is to see if there is a wound on the scalp, there is a part of the wound can not be painted cream Check the hair condition, that is to check the quality of hair? The hair is overweight or used by glial wax deep shampoo. Otherwise, before dyeing to avoid shampoo, shampoo, try not to scratch the scalp, wash hair must be dried and dyed, so as to avoid jumping colors; Ask the client whether there is a history of skin allergy, and if necessary, try a skin test (after putting the cream on the ear, and check the itching sensation and redness and swelling after 24 hours.). (3) color hair dyed in stages: First dye: first dye hair to the hair end 20 minutes, and then dye the hair root, leave part of 20 minutes. Fill dye: first dye the hair root for 20 minutes, then dye the tail for 20 minutes, and spray the water evenly for 10 minutes. The multiple root hair dye: first 10 minutes, then Hair Coloring in 10 minutes, finally Hair Coloring tail 10 minutes, 5~10 minutes of moderate water comb. The white color dyeing method, using color: cream plus 6% dioxygen milk after 20 minutes, covering. Two, the first black paste plus target color and 6% part hair dye double oxygen milk, 20 minutes after flushing, drying; and color paste plus 12% dioxygen milk for a dye. (4) calculation of chromaticity depth: Deep dyeing light: target color light base depth = fade de