常见门窗（Common doors and windows）.doc

常见门窗（Common doors and windows） 1. door high: Door for people, the height is generally not less than 2m, and then high should not exceed 2.4m, otherwise there is a sense of emptiness, the door production needs to be particularly strengthened. Such as modeling, ventilation, lighting needs, you can add a window on the door, its height from 0.4m onwards, but it should not be too high. For vehicles or equipment through the door, according to the specific circumstances of the decision, its height should be higher than the vehicle or equipment 0.3 ~ 0.5m, so as not to bump the vehicle or equipment needs to pad drum handle collision door frame. As for the clearance requirements of all types of vehicles, refer to the corresponding specifications. If the stadium, exhibition hall, large volume, large space buildings, need to set up a super scale when the door is attached at the gate door is provided by conventional fan, do not need to open the door for when people can pass. Check the door a lot of various equipment well within the building, it is often through the place, so the general frame of high and ordinary door neat or less, and a baseboard with high threshold remains below its height, you do not need to worry about 2m, about 1.5m to. 2. door width: General residential door 0.9 to 1m, sub room door 0.8 ~ 0.9m, kitchen door 0.8m or so, toilet door 0.7 ~ 0.8m, due to consider the move of modern furniture, now take the upper limit size. Public building door width is generally a single door 1m, double door 1.2 to 1.8m, and then the width of the door to consider the production, double doors or more doors of the door width of 0.6 ~ 1.0m is appropriate. 3 window In residential buildings, the height of the window is 1.5m, plus the window height is 0.9m, the window top is 2.4m away from the floor, and the structure height of 0.4m is left. In public buildings, the height of the window sill ranges from 1 to 1.8m, and the window sash opening to the public walkway should not be less