juniper防火墙l2tp配置方法（Juniper firewall L2TP configuration method）.doc

下载文档 降价啦

114
0
约4.12千字
约 7页
2017-08-20 发布于河南
举报
版权申诉
保障服务

juniper防火墙l2tp配置方法（Juniper firewall L2TP configuration method）.doc

1、本文档共7页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

juniper防火墙l2tp配置方法（Juniper firewall L2TP configuration method）

juniper防火墙l2tp配置方法（Juniper firewall L2TP configuration method） L2TP configuration method (Win2000): Settings on the ScreenOS side Setting up L2TP users 1. Objects Users Local New: enter the following, and then click OK: User Name: Adam Status: Enable L2TP User: (select) User Password: AJbioJ15 Confirm Password: AJbioJ15 2. Objects Users Local New: enter the following, and then click OK: User Name: Betty Status: Enable L2TP User: (select) User Password: BviPsoJ1 Confirm Password: BviPsoJ1 3. Objects Users Local New: enter the following, and then click OK: User Name: Carol Status: Enable L2TP User: (select) User Password: Cs10kdD3 Confirm Password: Cs10kdD3 Two, set up the L2TP user group 4. Objects User Groups Local New: in the Group Name field, type FS, do the following, and then click OK: Select Adam, and then use the button to move it from the Available members column to Group members column. Select Betty, and then use the button to move it from the Available members column to Group members column. Select Carol, and then use the button to move it from the Available members column to Group members column. Three, default L2TP settings 5. Objects IP Pools New: enter the following, and then click OK: IP Pool Name: Global Start IP: 10.10.2.100 End IP: 10.10.2.180 6. VPNs L2TP Default Settings: enter the following, and then click OK: IP Pool Name: Global PPP Authentication: CHAP DNS, Primary, Server, IP:, 210.11.6.2 DNS, Secondary, Server, IP:, 210.11.40.3 WINS, Primary, Server, IP:, 0.0.0.0 WINS, Secondary, Server, IP:, 0.0.0.0 Four, set the L2TP channel 7. VPNs L2TP Tunnel New: enter the following, and then click OK: Name: sales_corp Dialup, Group:, Local, Dialup, Group - FS Authentication Server: Local Outgoing Interface: ethernet3 Peer IP: 0.0.0.0 Host Name (optional): you can empty it. Secret (optional): you can empty it. Five, strategies 8. Policies (From:, Untrust, To:, Trust) New: enter the following, and then click OK: Source Address: Addres