nreadme（nreadme）.doc

nreadme（nreadme） [document description] This description changes time: 2005/04/20 This file will be updated and corrected. [document] (1) installation order (two) server installation (three) about network lock (four) server-side program (five) the monitor program on the server side (six) configuration file and record file of USB network lock (seven) common problems [attention] PKPM network version before the installation, entitled: your network environment is all properly installed. [key tips] (1) do not plug in the USB network lock when installing the software. (2) when the USB network lock is added to the server that has been installed with the USB PKPM network lock, there is no need to install the Server program and insert the new lock directly into the other USB ports. (3) when the USB network lock is changed again, the corresponding sequence number of the lock will change. At this point, you can manually modify the \PKPM\CFG\PKPM.ini file on the server. See (three) on the network lock section. (4) if you want to uninstall this version of the Server program on the server, you must stop and uninstall the service PKPMsvr.exe. When you change the USB network lock or register a certified USB network lock, you must also stop and uninstall the service program PKPMsvr.exe. (5) the network administrator can run the monitor of PKPMmon.exe under the PKPM\NetServer directory on the server to check the usage of each node and terminate the use of a node. (6) the normal use of the USB network lock on the server is that the network lock driver is functioning normally. Install the PKPM Server program, has automatic driver installed network lock, through the CD Win9x directory under the PKPM_Driver.exe program, to remove or install the network lock driver, but the uninstall or install the network lock driver needs to restart your computer. (7) the PKPM Server program installed on the server needs to log in with Administrator. When the client installs the program in Client.set, i