功率场效应管测试仪（Power field effect tube tester）.doc

功率场效应管测试仪（Power field effect tube tester） Power field effect tube tester is mainly used for the quality inspection of power field effect transistors and IGBT, the matching of parameters and the withstanding voltage test of other electronic components. It is one of the most commonly used device testing instruments in the electronics industry. The breakdown voltage VDSS, the gate open voltage VGS (th) and the amplified characteristic parameter transconductance Gfs can be accurately measured. Performance parameters of field effect tube tester 1, the breakdown voltage of VDSS measuring range: 0 - 1999V, accuracy: less than 2.5[%]. 2, IDSS can be divided into three blocks: 1mA, 250uA, 25uA. 3, gate open voltage VGS (th) measurement range: 0 - 10V. Accuracy: less than 5[%]. 4, Gfs transconductance test current Idm: not less than 1 - 50 A continuously adjustable accuracy: less than 10 [%]. 5, Gfs transconductance test range: 1 - 100. 6, the power supply voltage: AC220V, 50HZ, power: 30W. 7, work environment: 0 to 40 DEG C, relative humidity: more than 85[%]. 8, size: 280 * 230 * 130mm. 9, weight: about 3 Kg. The main function of field effect tube tester 1. Test of breakdown voltage VDSS, gate open voltage VGS (th) and transconductance Gfs of power field effect transistor. 2, IGBT breakdown voltage V (BR) CES, gate open voltage VGE (th), transconductance Gfs test. 3 、 power field effect transistors and IGBT conformance test under 50A high current can be used for pairing. 4 and other higher current power field effect transistors and IGBT under 50A current test. 5. Testing of breakdown voltage of various kinds of crystal triode, diode and regulator tube. 6 、 varistor voltage test, etc.. Method for using field effect tube tester Before turning on the power switch, check that the Idm switch and high voltage switch should be placed on the OFF position. 1, plastic power FET test: press fifth: test box and additional test line instructions, connected to fet dedicated test box and