反光板使用方法（Method for using reflector）.docVIP

反光板使用方法（Method for using reflector） How to use the reflector The role of reflectors. The biggest role is as a stool to MM on the grounds, but also when the table, put what the package, this does not show the table, huh. In fact, I think the reflector no more than two effects: light and light manufacturing. First fill. The light was divided into several cases, such as the shadow under the sun on the guys face, the reflector can eliminate or weaken the shadow play up, this is a. Sometimes the body and no unacceptable shadows, but too dark to shoot down may make the body and the environment exposure imbalance, will need to balance your contrast, can also be a light; there is a situation, such as trees or sunny day in the shadow of the house, temperature is relatively high, while the cold environment may have reflected light, so the main body the color will be partial green, then I love with a golden light reflecting plate, add some warm, the skin will not be so ugly. The use of reflectors. How can I use the reflector? Of course, its good for you! Ha-ha。 Its not a joke. Im sure its the right way, so you have to have an assistant, or you can help each other. Adjust the reflector is deliberately, someone with a shelf, or with his knee, the studio photographer also often spread on the ground, I think this is not the right way, the effect can not control. Specifically, from the direction, height, brightness of light reflecting plate technique. About direction. First of all, the reflector must not be back to the light source, otherwise there is no light can be reversed, this will all be noticed. But the reflector is not placed on the opposite side of the light source. In general, regardless of the direction in which the light source, a reflector should be arranged between the camera and MT connection -- because it is really in line to put his camera, so it is usually on both sides of the optical axis of the lens, the angle as small as possible. Of course, if the film is smoo