穴蚀的原因,与电化学腐蚀有什么关系,以及冷却水的温度关系 - 『发动机技术论坛-设计匹配』 - 中国汽车工（The reason of cavitation, what is the relationship with the electrochemical corrosion, and the temperature of the cooling water - Engine Technology For.docVIP

穴蚀的原因,与电化学腐蚀有什么关系,以及冷却水的温度关系 - 『发动机技术论坛-设计匹配』 - 中国汽车工（The reason of cavitation, what is the relationship with the electrochemical corrosion, and the temperature of the cooling water - Engine Technology For Give you good selections Diesel engine cylinder liner cavitation is due to the cavitation corrosion, electrochemical corrosion and other corrosion caused by the comprehensive effect. Cavitation corrosion is circular and the piston pressure change in the cylinder. The side thrust caused by elastic deformation and high frequency vibration of the cylinder liner. Raw。 The high frequency vibration of the cylinder liner of cooling water continuously alternating Tension and compression. When the cooling water is stretched, the connectivity is destroyed. By water Cohesion in water is less than the adhesion, the water close to the wall The vibration from the wall layer, only a thin water film attached to the cylinder wall, water film and large department Local instantaneous vacuum forming water layer, it appears with steamed in water Gas vacuole; at the same time, the cooling water is heated in the instantaneous water In the bubble; what is the cylinder vibration acceleration is large, guide; Cooling water movement can not keep up, even the water film is difficult to attached to the wall Being away from the surface of the cylinder wall, resulting in cooling water and wall appeared Local vacuum produced other gas containing water vapor generated from water or Body cavity. When the cooling water is compressed, the bubble has been compressed, cavitation The water vapor rapid liquefaction bubble burst, cavitation around the water quickly Into space, produce a strong shock wave on the surface of the cylinder wall. this Although the impact effect of time and space is very small, but it is even Continued repeatedly production and role in small area on the wall, rolling gold Is the metal plastic deformation and fatigue damage, the wall surface of gold Is gradually being formed hol