04款大众奥迪 发动机不能起动（04 Volkswagen Audi engines are not activated）.docVIP

04款大众奥迪 发动机不能起动（04 Volkswagen Audi engines are not activated） 04 Volkswagen Audi engine can not start, start about one second after the flameout Fault phenomenon: 04 Volkswagen Audi, engine can not start. The engine starts about one second and then goes out. Diagnosis： First, connect the VAG1551/VAS5051 to self diagnose, enter the address code 01, enter the engine system, enter the address code 02, and read the fault code. The engine control unit failure memory has a fault that the engine control unit is locked, and the fault code is 17978, indicating that the electronic control system of the burglar alarm control unit does not lift the locking status of the engine control unit. Then enter the address code 05, clear the fault storage, the engine or start about one second after the flameout. Analysis： After inspection, the car is equipped with a third generation of anti-theft system, the third generation of anti-theft system with W key words, recognition device of electronic anti-theft device for the third generation of anti-theft system mainly concentrated in the car keys on the head a small silicon crystal, the anti-theft lock unit, engine control unit, a detection identify information encoding. Only when the original key is inserted into the ignition switch, anti-theft lock unit will identify successful electronic anti-theft device of the vehicle is not activated, the driver can start running. Conversely, if the detection and identification process fails, the electronic anti-theft device is activated by the anti-theft system and locks the engine. Testing： In the third generation anti-theft system, the anti-theft system control unit and the combination instrument are combined together, testing the anti-theft system can only enter from the dashboard system. From the anti-theft system can also enter, but the test out as useless data. So, need to input the address code 17, enter the combination instrument system, 02 fault memory, found the security control unit fault