10天学会cad 1（10 days learning CAD 1）.docVIP

10天学会cad 1（10 days learning CAD 1） AUTOCAD 2012 QQ:463719183 First days: 1. toolbar Toolbar Directly in the menu bar, there are usually the following: Drawing, modifying, layers, annotations, blocks, properties, groups, utilities This lesson: 1., drawing, modify 2., mark 3. layers, characteristics. 2. cursor adjustment Drawing area, right mouse button / option / Display / cross cursor size Select / pick box size (slightly larger) 3. selection method Click Select Frame selection From left to right (blue) contains all objects From right to left (green) as long as you hit the object 4. cancel ESC Delete delete (delete selected object) Undo ctrl+z Redo ctrl+Y 5. mouse button Double click to display all of the objects in the screen Scroll zoom objects Press and drag to move the object 6. command bar Where all commands appear, draw objects through the command bar. Seven Orthogonal F8 Horizontal and vertical states that can only be drawn horizontally and vertically when opened. Object capture F3 Find a special point, right click the object capture / settings / control point switch Object tracking F11 The function of the ruler, the cursor at the point, and slowly pull out, the ruler can appear. 8. determine key Space, carriage return, right key 9. line L Specify the starting point, pull out the direction, enter the length, and determine the point. Relative coordinate Specifies the starting point input coordinate (X, Y) point determination. Second days: Relative coordinate After you specify the first point in the line, enter the coordinate value (X, Y) Note: coordinate is the coordinate of relative starting point Line L 1, the angle of judgment The zero position is at the horizontal line on the right side of the starting point The angles are counterclockwise, and the clockwise is negative. 2 angle input method After the specified starting point, pull out the direction input length shift+ angle value * click the OK button again after the command is over, repeat the last comma