autocad 图片输出（autocad 图片输出）.docVIP

autocad 图片输出（autocad 图片输出） Cad output mode 1. A way to output pictures in Cad: In the command line, enter jpgout, and then save, select the area you want, and the OK suffix is.Jpg In the command line, enter bmpout, and then save, select the area you want, and the OK suffix is.Bmp 2, two ways to output pictures in Cad: Method: add virtual printer printer manager \ \ \ \ next add printer printer type, find the raster file format \ independent JPE (JPE compression), has been marshalling the next installation has become. Back to the print dialog, select the independent JPE grouping in the selection of the printer when (JPE compression) in the printer. Print to a file save location and file name. Then select the graphic boundaries you want to print. After that, just click the line. If there is no printer at the end of the JPG name, you can add, CAD comes with, this is the default. Click the file - output, then determine the name of the file, (WMF metafile format) and then select, right-click to confirm. OK, a WMF primitive picture generated, zoom in and out of distortion, and in CAD, the file is too small to make people speechless. File conversion between 3.AutoCAD and Photoshop (1) AutoCAD cannot render blocks of complex shapes. In AutoCADR14, although you can render blocks, you cant render with gradients or filled blocks. In AutoCAD, users often use Hatch commands to fill the closed area with Scale commands in complex shapes, and change the color to obtain a complicated color image block. But in doing so, graphics files become large and AutoCAD runs slower. The best way is to AutoCAD in two-dimensional or three-dimensional graphics output to BMP, TIF, GIF and other formats of documents, into the Photoshop coloring. (2) the three-dimensional axonometric drawing or perspective drawing in AutoCAD can be output into DXB file. After inputting, the DXB file becomes a two-dimensional entity graph, and each line and arc can be edited. (3) output image files in AutoCAD (except