希捷维修技巧.docVIP

ST酷鱼常见故障大全及维修办法???????????????????????????? (1)Interface task reset1024k x 16 buffer detected? ALPINE - 1_Disk??? S.15? 01-16-03 11:51 Head Mask 0000 - Switch to full int.???????????? Spin Ready 3.06? 05-13-03 14:11 (P)PATA Reset? Master此为正常认盘信息，如果无任何报错，但扫描有坏道，可先清空SMT表，然后ERASE，若无效，则做B级工厂自校准 (2)1024k x 16 buffer detected? ALPINE - 1_Disk??? M.14? 01-16-03 11:51 Head Mask 000F - Switch to full int.?????????????? Spin Ready 8.01? 04-05-04 15:38 (P)PATA Reset OVERLAY FAILED ( T固件丢失不认盘，用快速回写原盘ATA，若无原盘固件，需找FW一样，SN号至少前4位一样的ATA，慢写 (3)(Interface task reset 1024k x 16 buffer detected? ALPINE - 1_Disk??? M.14? 01-16-03 11:51 Head Mask 000F - Switch to full int.?????????????? Spin Ready 8.01? 04-05-04 15:38 (P)PATA Reset? Stuff Was Unreadable 容量参数丢失不认盘方法：模块区，选择对应型号回写，也可自定义写参数 (4)Interface task reset1024k x 16 buffer detected? ALPINE - 1_Disk??? S.15? 01-16-03 11:51 Head Mask 0000 - Switch to full int.???????????? Spin Ready Failed sys sect. write Failed sys sect. write Failed sys sect. WriteMaster此类报错，先备固件，然后快速修复即可，注意：快修过程不可随意断电(5)Interface task reset1024k x 16 buffer detected? ALPINE - 1_Disk??? S.15? 01-16-03 11:51 Head Mask 0000 - Switch to full int.???????????? Spin Ready AutoRd Err 43 at 700a.00.0001 AutoRd Err 47 at 700a.00.0004AutoRd Err 43 at 700a.00.0007AutoRd Err 47 at 700a.00.0009Master对于认盘前43、47报错，模块区，重复写几次容量参数，或者做工厂测试（做前要先备固件） (6)Interface task reset1024k x 16 buffer detected ALPINE - 1_Disk??? M-21? 11-25-03 18:53 Buzz? - Head Mask FFFF - Switch to full int.????????????? Spin Ready8.01? 09-28-04 15:05(P)PATA ResetMasterCE Log EC=43? Rtype=24 OV=0 STStatus0AT Er 00 Nwt Er 43 RdWr 0018.00.0000ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00Niwot:? 00002c2a? ff? 00002c2a.0.000 00db 0000? e700 0001CE Log EC=47? Rtype=24 OV=0 STStatus0AT Er 00 Nwt Er 47 RdWr 0018.00.0000ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00Niwot:? 00002c2a? ff? 00002c2a.0.000 00db 0000? e700 0001 对于这种认盘后报错，有固件错误和头坏，故可做B级工厂自校准或关闭磁头来修复 (7)TIntf tsk rst 1024k x 16 buffer