design of the control system about central signals in electric vehicle设计的控制系统对电动汽车的中央信号.pdfVIP

J. Electromagnetic Analysis Applications, 2010, 2: 189-194 1 doi:10.4236/jemaa.2010.23027 Published Online March 2010 (http://www.SciRP.org/journal/jemaa) Design of the Control System about Central Signals in Electric Vehicle Qianqian Zhang, Yan Wang, Tianming Yin Electrical Engineering School, Beijing Jiaotong University, Beijing, China. Email: zhang.q_0401@126.com, yanwang@ Received December 1st, 2009; revised January 6th, 2010; accepted January 10th, 2010. ABSTRACT Based on the development demand of electric vehicles, this paper studies the communication network in electric vehi- cles based on CAN bus after analyzing the LCD (liquid crystal display) in electric vehicles and the status quo of re- search and development trend about communication network. This system uses TMS320LF2407 DSP as the controller of the control system about central signals. It has also developed the LCD system based on CAN bus and the experiment platform which is applied pure electric vehicles. Keywords : CAN Bus, DSP, Electric Vehicle, LCD System, SCI 1. Introduction multifunction, high accuracy, high sensitivity, direct and reliable reading and picture display has been applied in Field bus is one hot topic in the developing technology in the vehicle gradually. Therefore, electronic instrument the automatic field. It is praised as Regional Network of will replace conventional electromechanical instrument Computers in the automatic field. Its appearance pro- gradually. vides powerful technical support for DCS (Distributed This paper applies CAN bus technology in the control Control System) to realize real-time and reliable data system