sf6 byproducts in high-humidity environment an experimental evaluation between 200oc and 500ocsf6气体副产品在高湿环境下200度和500度之间的实验评价.pdf

Journal of Electromagnetic Analysis and Applications, 2011, 3, 179-183 179 doi:10.4236/jemaa.2011.36029 Published Online June 2011 (http://www.SciRP.org/journal/jemaa) SF Byproducts in High-Humidity Environment: 6 An Experimental Evaluation between 200˚C and 500˚C Yu Wang, Li Li, Weijian Yao Electric Power Test Research Institute, Guangdong Power Grid Company, Guangzhou, China. Email: wangyu_0306@126.com Received February 15th, 2011; revised April 6th, 2011; accepted April 15th, 2011. ABSTRACT In the occurrence of arc discharges, spark discharges, corona discharges and overheated faults in electrical equipment, SF would be decomposed to complicated byproducts, such as SO , H S and HF. Analyzing these byproducts is an ef- 6 2 2 fective method to judge the internal operation condition of electric equipment . In order to study characters of SF6 by- products at different temperature of overheated faults in the electric equipment , a series of overheated faults of electric equipment were simulated. SF6 is very stable and not significantly decomposed at 200˚C, 250˚C and 300˚C. SF6 is sig- nificantly decomposed to SO , H S and HF at 350˚C. The concentration of SO , H S and HF was 7.2, 1.6 and 1.9 μL/L 2 2 2 2 after heating for 5 hours in environment of SF6 with 3616 μL/L water , and it was increased to 23.0, 3.0 and 1.2 μL/L 3 hours later. SF6 is more easily to be decomposed and decomposed more rapidly at higher temperature. The concentra- tion of SO , H S and HF was 62.2, 15.6 and 3.6 μL/L after heating for 5 hours in environment of SF with 4064 μL/L 2 2 6 wate