铸造铝合金轮毂充型与凝固过程仿真及缺陷预测.PDFVIP

DOI:10.14158/ki.1001-3814.2010.21.018 金属铸锻焊技术 年 月 sting · ging · lding 2010 11 Ca For We 铸造铝合金轮毂充型与凝固过程仿真及缺陷预测 张华， 陈丰 （安徽科技学院 工学院，安徽凤阳233100 ） 摘 要： 采用Anycasting 软件，通过对铝合金轮毂充型、凝固过程的模拟，预测了金属液充型、凝固过程时间、温度 分布以及微观组织结构；通过对流动场与温度场的耦合计算，预测了铸件产生卷气、缩孔、缩松等缺陷的部位与形成原 因，并提出了改进方案，从而缩短了生产周期，提高了铸造铝合金轮毂质量。 关键词： 铝合金轮毂；充型；凝固；数值模拟；缺陷预测 中图分类号： 文献标识码： 文章编号： TG244 A 1001-3814(2010)21-0070-02 Numerical Simulation of Filling and Solidification Process of Cast Aluminum Alloy Wheels and Its Defects Prediction n ， ZHANG Hua CHEN Feng c (Engineering College, Anhui Science and Technology University, Fengyang 233100, China) . Abstract ： Through the numerical simulation on liquid metal filling and solidification process of cast aluminum alloy wheels, using Anycasting software, the time and temperature distribution of filling and solidification process and its g microstructure were predicted. The position and reasons of filling and solidification defects ， such as gas volume, shrinkage r ， cavity and shrinkage were predicted through coupling calculation for flow field and temperature field. The improvement 库 process was proposed. So the production cycle shortens and the quality